Xilinx VCU128 User Manual

Figure 30: Cooling Fan Circuit
X21975-112818
System Controller
[Figure 2, callout 8]
The VCU128 board includes an onboard Zynq
®
-7000 SoC U42 as the system controller. A host
PC resident graphical user interface for the system controller (SCUI) is provided on the VCU128
website. The SCUI can be used to query and control select programmable features such as
clocks, FMC funconality, and power systems. The VCU128 evaluaon kit website also includes
a VCU128 System Controller Tutorial (XTP534) and the VCU128 Soware Install and Board Setup
Tutorial (XTP535). A summary of the steps is as follows.
1. Ensure the Silicon Labs VCP USB-UART drivers are installed on the host PC. See the Silicon
Labs CP210x USB-to-UART Installaon Guide (UG1033).
2. Download the SCUI host PC applicaon.
3. Connect the micro-B USB cable between the VCU128 board USB-UART connector (J2) and
the host PC.
4. Power-cycle the VCU128 board.
5. Launch the SCUI as shown in the following example.
Chapter 3: Board Component Descriptions
UG1302 (v1.0) December 21, 2018 www.xilinx.com
VCU128 Board User Guide 90
Send Feedback

Xilinx VCU128 Specifications

General

Brand	Xilinx
Model	VCU128
Category	Motherboard
Language	English