Appendix A
VITA 57.4 FMCP Connector Pinouts
Overview
The following gure shows the pinout of the FPGA mezzanine card plus (FMCP) connector J18
dened by the VITA 57.4 FMC specicaon. For a descripon of how the VCU128 evaluaon
board implements the FMCP specicaon, see FPGA Mezzanine Card Interface.
Figure 32: FMCP Connector Pinouts
X21978-112818
UG1302 (v1.0) December 21, 2018 www.xilinx.com
VCU128 Board User Guide 93