Xinje XC Series - Page 112

Appendix special soft device list
D8123
Data number RS232 received
D8126
D8127
Communication error code
7: hardware error
8: CRC Parity error
9: station number error
10: no start code
11: no end code
12: communication time out
D8128
Modbus communication error
(the replied message from slaves
when the master send errors)
0: correct
1: don’t support function ID
2: address error (overrun address)
3: Data error (the number of data)
8: saving data error (rewrite Flash)
D8129
Com2
D8130
D8131
D8132
the left data RS232 should send
D8133
Data number RS232 received
D8136
D8137
Communication error code
7: hardware error
8: CRC check error
9: station number error
10: no start sign
11: no end sign
12: communication time out
D8138
Modbus communication error
(the replied message from slaves
when the master send errors)
0：correct
1: don’t support function ID
2: address error(overrun address)
3: Data error ( the number of data)
8：saving data error ( rewrite Flash）
D8139
Com 3
D8140
D8141
D8142
the left data RS232 should send
D8143
Data number RS232 received
D8146
D8147
Communication error code
7: hardware error
8: CRC check error
9: station number error
10: no start sign
11: no end sign
12: communication time out