Xinje XC Series User Manual

Appendix 3 version for special function
Appendix 3 Version for special function
Generally, the functions and instructions described in this manual don’t have software and
hardware requirements. But for some special functions, we have software and hardware versions
requirement. Below, we list these requirements for the special functions;
function
Hardware
version
Software
version
Fill move 32 bits instruction DFMOV
V3.0 and above
V3.0 and above
Float number move instruction EMOV
V3.0 and above
V3.0 and above
Gray code switch to binary instruction GRY, GBIN
V3.3 and above
V3.3 and above
Anti-trigonometric Operation
V3.0 and above
V3.0 and above
Read/write clock
V2.51 and above
V3.0 and above
Read/write high speed counter
V3.1c and above
V3.0 and above
Interrupt high speed counter
V3.1c and above
V3.0 and above
Pulse output PTO, PTOA, PSTOP, PTF
V3.3 and above
V3.3 and above
Free format instruction RCVST
V3.1e and above
V3.1f and above
Read precise time
V3.0e and above
V3.0 and above
Stop precise time
V3.0e and above
V3.0 and above
C program block function
V3.0c and above
V3.0 and above
PID function
V3.0 and above
V3.0 and above
Block
V3.1i and above
V3.1h and above
Connect T-BOX
V3.0g and above
V3.0 and above
Connect G-BOX
V3.0i and above
V3.0 and above
Connect XC-SD-BD
V3.2 and above
V3.2 and above
Read/write XC-E6TCA-P, XC-E2AD2PT3DA,
XC-E2AD2PT2DA
V3.1f and above
V3.1b and above
Expand register ED
V3.0 and above
V3.0 and above

Xinje XC Series Specifications

General

Brand	Xinje
Model	XC Series
Category	Controller
Language	English