Safe Driving
151
4
5
6
7
8
9
10
11
Warning
When installing a child seat in the rear seat, the
following instructions need to be followed:
●
Please adjust the position of the front
passenger seat reasonably to avoid
collision between the child seat/child and
the front seat.
●
During the installation of the child seat,
the height of the headrest should be
adjusted reasonably or the headrest
should be removed to avoid interference
with the child safety seat.
Checking the Child Safety SeatChecking the Child Safety Seat
After installing the child safety seat, check the After installing the child safety seat, check the
seat for looseness:seat for looseness:
1. 1. Secure the child safety seat along with the Secure the child safety seat along with the
seat belt and try to move/shake the seat from seat belt and try to move/shake the seat from
side to side, and from front to back.side to side, and from front to back.
2. 2. If the seat can move more than 2.5 cm, If the seat can move more than 2.5 cm,
indicating that it is too loose, fasten the seat indicating that it is too loose, fasten the seat
belt or reinstall it to the ISOFIX anchorage.belt or reinstall it to the ISOFIX anchorage.
3. 3. If you cannot fasten the seat, try another seat If you cannot fasten the seat, try another seat
position or replace the seat.position or replace the seat.
Warning
●
Never place a rear-facing child safety seat
in a seat with an activated airbag, or it will
pose a serious risk of injury or death.
To Next Page
Loading...
