Preparations Before Driving
49
2
3
4
5
6
7
8
9
10
11
Warning
●
The obstacle avoidance function of the
front door will remember the stop position
limit before powering off. If there is an
obstacle in the door opening path before
the power off, even if the obstacle has
been removed, when the door is opened
again after power on, the door may only
open to the memory stop position. In this
situation, it's available to let the door go
on by manually pressing the button switch.
●
Do not paste or apply adhesive products
(such as tape, stickers, rubber paint, etc.)
on the outside of the front door to block
or cover the sensor. Otherwise, it will affect
the detection performance of the sensor.
Warning
●
Before opening the door, make sure
there's enough free space for the door
and glass to open/close, the door or
window glass may be damaged.
●
If there is snow or ice on the front door,
please clear them before opening the
doors. Otherwise, snow may enter the
vehicle and turn to ice that prevents the
door from opening.
●
It takes time to complete the doors
opening and closing. If the X-wing door
is opened in rainy weather, it will cause
rainwater to flow from the X-wing door into
the front seat area or onto occupants.
To Next Page
Loading...
