Page 14 DP224/6 Operators Manual
2 x 3 way
This format feeds input A to outputs 1, 2, and 3 designated low, mid, and high
respectively. Input B feeds outputs 4, 5, and 6, as low, mid, and high respectively.
Note that this configuration, as with the 2 x 2 way, can have the outputs ganged for
stereo operation. This gangs outputs 1 & 4, 2 & 5, and 3 & 6, so that they track
identically. It can be selected or modified by entering the ‘Design a Xover’ function
again. Any changes made to the crossover points or EQ will not be affected by
swapping from pre to post or vice versa.
To Next Page
Loading...
Need help?
General
