XTA DP4 Series User Manual

Page 28 DP224/6 Operators Manual
X-over Sub-Menu
Load a Xover
Loads a stored crossover from the selection available. Enter accepts the selected
name and loads immediately.
Design a Xover
Opens a wizard to design a crossover. Options include format type, ganging of
outputs, routing and automatic limiter time constants. The table below outlines
which options are available dependant on what type of crossover is chosen for the
design.
2 x 2 Way 2 x 3 Way 4 Way 5 Way 6 Way
A+B:Pre/Post In. EQ Out 5 Source:A/A+B
Gang Outputs:Yes/No Gang Outputs:Yes/No Out 6 Source:A/A+B Out 6 Source:A/A+B
Input A EQ:8/16 Band Input A EQ:8/16 Band Input A EQ:8/16 Band
A+B:Pre/Post In. EQ
Auto Limit TC:Yes/No Auto Limit TC:Yes/No Auto Limit TC:Yes/No Auto Limit TC:Yes/No Auto Limit TC:Yes/No
Store a Xover
Stores a X-over (all output settings) to one of 9 locations. Crossovers can be named,
using the same method as memories, with up to 16 characters which appear in the
default screen on the top line of the display.
Erase a Xover Mem
Permits clearing (erasing) of individual crossover memories from the unit. Note that,
once erased, the memory name disappears form the list of recallable locations. If the
crossover memory is currently in use, it’s name will remain on the default screen, and
the current settings will not be changed.

XTA DP4 Series Specifications

General

Brand	XTA
Model	DP4 Series
Category	Recording Equipment
Language	English