XTA DP4 Series User Manual

DP224/6 Operators Manual Page 29
Security Sub-Menu
After selecting the ‘Security Sub-Menu’ and pressing ENTER, select one of the lock
types, after choosing the most appropriate one for your application. As ever, ENTER
will confirm your selection.
User Specific
Upon pressing ENTER to select this type of lock, each parameter group is presented
in turn. Choose the type of lock (as above) using the FREQ encoder, and press
ENTER to confirm each parameter. After the last parameter, the unit requests a
password. The description of this operation is given at the end of this section.
This option allows the user to specify, for each type of parameter, whether it is to be
completely accessible (‘No Lock’), viewable but not adjustable (‘Control’), or
effectively unavailable (‘Display’). The ability to operate mutes, store or recall
memories, or even access the menus may also be locked.
Xover Only
All input parameters are available, but only the gain trim is available on the outputs,
effectively locking all the crossover settings. All mutes remain active.
Xover + Trim
All input parameters available, but no output parameters – the crossover sections are
completely locked. All mutes remain active.
Xover + Trim + Mute
As for ‘Xover + Trim’ but additionally, output mutes are locked. Input mutes remain
active.
Changes Only
All parameters may be viewed, but none may be adjusted. This apples to both inputs
and outputs. All mutes remain active.
Changes + View
No parameters are accessible – in effect the GAIN keys do nothing. All mutes remain
active.
Changes + Mutes
All parameters may be viewed, but none may be adjusted. This apples to both inputs
and outputs. All mutes are also locked.
EVERYTHING
No parameters are accessible – in effect the GAIN and MUTE keys do nothing.

XTA DP4 Series Specifications

General

Brand	XTA
Model	DP4 Series
Category	Recording Equipment
Language	English