Xtool A30D User Manual

— 29 —
I/M Readiness
This function is used to check the readiness of the monitoring system. It is an
excellent function to use prior to having a vehicle inspected for compliance with a
state emissions program. Selecting I/M Readiness opens a submenu with two
choices:
 Since DTCs Cleared – displays the status of monitors since the last time
the DTCs are erased.
 This Driving Cycle – displays the status of monitors since the beginning of
the current drive cycle.
Figure 4-11 Sample of I/M readiness screen

Xtool A30D Specifications

General

Brand	Xtool
Model	A30D
Category	Diagnostic Equipment
Language	English