Xtralis ADPRO PRO E - 7 Unwanted Alarms

ADPROPROE by Xtralis Installation Guide
27386_05 39
7 Unwanted alarms
Possible cause Possible solution
Animals in the detection range. Check whether there are any animals. Fence in the detection range if
necessary.
Vegetation moved by wind or
animals.
Check, whether vegetation (such as branches and leaves) moves.
Remove or cut the interfering vegetation.
The sensitivity of the device is
too high.
Adjust sensitivity settings if need be.
Heat sources. Check if there any heat sources within the range of the device (e.g.
kitchen exhaust or waste heat from an air-conditioning system). Adjust
the alignment of the device if necessary, or shield it from heat sources.