ADPROPROE by Xtralis Installation Guide
27386_05 41
8 Dismantling and disposal
At the end of its useful life, the device must be dismantled and disposed of in an eco-friendly manner.
8.1 Work safety
Personnel
Work on the electrical system must be performed only by qualified electricians.
8.2 Measures before dismantling
Perform the following steps before you begin dismantling:
1. Switch off the power supply.
2. Protect the main switch with a padlock, so that it cannot be switched on.
8.3 Disposal
Damage to environment
ATTENTION:
Risk to environment through improper use!
Improper use of substances that are hazardous to the environment, and in particular their
improper disposal, can cause substantial environmental damage.
Hence:
l Always follow the instructions in this guide
l Initiate appropriate measures immediately if environmentally hazardous substances are
released into the surroundings. Inform the responsible local authority of the damage in case
of doubt.
Dismantled components must be recycled as follows:
l as scrap metal
l as plastic parts for recycling
l other components to be disposed off by sorting by material
You can obtain information about eco-friendly disposal at the competent local authority or at specialized waste
disposal companies.
To Next Page
Loading...
