Xtralis ADPRO PRO E - Applicable Documents; Safety Precautions

Installation Guide ADPROPROE by Xtralis
2 27386_05
1.5 Applicable documents
1.5.1 Guides
l ADPRO PRO E Introduction to PIR Technology Guide, document no. (27385)
l ADPRO PRO E PIR System Setup Guide, document no. (26571)
l ADPRO PRO E PIR System Design and Planning Guide, document no. (27387)
l VdS Directive System Components for Perimeter Monitoring VdS3456
l prEN50606 External Perimeter Security Systems (in development)
1.5.2 Xtralis Websites
www.xtralis.com
Xtralis Security Solutions Support Site
www.xtralissecurity.com
You can find data sheets as well as commercial information in the public area of the website. Registration is
free, and our partners have access to detailed information such as guides, Xtralis white papers, presentations,
images, videos, certificates, as well as software and drivers free of charge.
Landing page ADPRO PRO E Passive-Infrared Detectors
www.xtralis.com/adpro_pro_e_detectors
Xtralis Product Videos
www.xtralis.com/video.cfm
1.6 Safety precautions
This section contains an overview of all important safety precautions to be taken for smooth and reliable
operation.
Non-observance of the instructions/warnings in this guide can lead to injury or death.
1.6.1 Responsibilities of the User
General The safety instructions in this guide are meant to ensure user safety and
prevent accidents. In addition, environmental protection standards must be
taken into consideration in positioning the device.
Defect-free technical
condition
To guarantee that the device remains in defect-free technical condition, the
maintenance instructions described in this guide must be followed.
1.6.2 Personnel requirements and qualifications
This guide assumes the following qualifications for the various tasks described in the guide:
Electricians Electricians having the educational background, experience and knowledge of
standards, regulations and procedures that qualify them to work on electrical
systems and risk detection.
System integrators Skilled system integrators having the educational background, experience and
knowledge of standards, regulations and procedures which qualify them for
work on alarm/IT systems and risk detection.