ADPROPROE by Xtralis Installation Guide
27386_05 1
Table of Contents
1 General Notes 1
1.1 Information about this guide 1
1.2 Warranty 1
1.3 Customer Service and Product Monitoring 1
1.4 Proper use 1
1.5 Applicable documents 2
1.6 Safety precautions 2
1.7 Environmental protection 3
1.8 Transportation, Packaging and Storage 3
2 Installation 5
2.1 Preparatory instructions 5
2.2 Instructions on cabling 6
2.3 Lightning and overvoltage protection 6
2.4 Detector Assembly 7
2.5 Pole mounting of detector holder 8
2.6 Wall installation of detector holder 10
2.7 Installation 12
2.8 PRO E-Series Installation steps 13
2.9 PRO E-RF Installation steps 20
2.10 Final check 25
3 Detector Alignment 27
3.1 Installation of the telescope 27
3.2 Alignment with the help of the telescope 27
3.3 CT PRO 2 – wireless walk tester 29
4 Detector configuration 31
5 Overview of the circuit board 33
5.1 Pin assignment Alarm Outputs 33
5.2 Interface module IFM-485-ST 34
6 Technical data 37
6.1 Maintenance and Cleaning 38
7 Unwanted alarms 39
8 Dismantling and disposal 41
8.1 Work safety 41
8.2 Measures before dismantling 41
8.3 Disposal 41
Notes 42
To Next Page
Loading...
