Xylem EXO Series - Page 49

pg | 49
Upload Data
from Handheld to PC
e EXO Handheld stores two dierent sets of sensor data les: Files uploaded from the sonde and les
manually logged into the Handheld from the live data mode. Both types of les can be sent to a PC via the
USB cable. Note that KOR Desktop soware must rst be installed on a computer before transferring les
from Handheld to PC.
1 Connect handheld to computer.
Plug the small end of the USB cable into the port on the
top side of the EXO Handheld. Plug the other end of the
USB cable into a port on your computer. Allow a minute for
Windows to recognize the Handheld as a removable drive
before the Handheld shows up in KOR soware.
2 Transfer files.
When the Handheld is connected to the PC, go to the
Options | Sync with Handheld menu in KOR Desktop
soware. Select Sync All and KOR will search all folders
and synchronize the les automatically. Or users can
select each folder separately and synchronize selected les
manually.
3 Delete files.
Directory Maintenance: Users can browse folders and
select les to delete from the Handheld. Deleting les is
optional.
3.7