pg | 48
Spot Sampling
Record Spot Sampling Data
e sonde can be used for both continuous and spot-sampling applications. Spot-sampling readings are
refreshed in real-time on the Dashboard screens. e so keys on the Handheld allow logging of this
information. ere are two options when logging data: log a single point or continuous logging. Users may
select one of these options from the live view settings window. (Live view log settings should not be used
for deploying a sonde in continuous monitoring applications. Use the Deploy menu for these applications.)
1 Capture data.
To capture spot sample les, go to the Run menu and click
the so key below the Capture Data button.
Select a site from the list of your pre-programmed sites
on the Handheld. If no sites have been loaded in the
Handheld, skip this step. e site data is appended to the
data le.
Data is captured in a .cap le on the Handheld.
2 Name file.
Whether logging data a single point at a time or logging a
stream of data, information will be stored in a le specied
under the Options menu. If a unique le name is not
selected, then a default le is automatically created.
3.6
To Next Page
Loading...
