System Description
Display and buttons
ON key is used to start the drive.
Menu key is used to enter/exit (2 seconds) the menu and to confirm
selection/change.
Up key is used to increase a value or selection in the submenu.
OFF key is used to turn off the drive.
Down key is used to decrease a value or selection in the submenu.
Hand key is used to enter the manual mode.
Auto key is used to enter the automatic mode.
Communication
SRC 311 is equipped with an RJ45 connector. The connection is used to set up a network
via a wired connection. The connector contains two independent RS485 connections and
both can be used simultaneously.
System Description
SRC 311 - SmartRun
™
User guide 15
To Next Page
Loading...
