Field
Name
Protocols Imp/Exp Function Max
Width
Notes
Meter
Definition
All Imp/Exp Special Code to Define Multiple
Head Meters. Used to create
multiple records for this multiple
head meter when the import file
does not create a separate record
with unique meter ID for each.
3
4
Meter
Serial
Number
All Imp/Exp Body number of the meter. 8
Middle
Initial
All Imp/Exp Customer's Middle Name Initial
(Note: If first, middle initial, and last
name are not separate fields in
import file, you can use an extra field
for full name)
1
Multiplier All Imp/Exp Multiplier expressed as a decimal
number (factor of 10). In AutoRead
versions 3.53 and higher, can be
applied to the register reading. So
for ex., if a TouchRead register reads
in 100 gallons and there is an import
field of 100 as the multiplier, it can
be set on AutoRead to apply the
multiplier to the read so it would
add 2 zeroes to the read. The
read would then be expressed in
1s of gallons. For a Sensus AMR
register, the multiplier in the export
is the actual multiplier that was
programmed in the AMR Register.
This was not available in an ECR II.
100
Multiplier(Scientific)All Export Multiplier expressed in Scientific
form. –99 to +99 which represents
1e-99 to 1e+99 range.
3
MXU
Status
HH/RRVE/
RR
Export Status value from read of a
RadioRead MXU. See Note 5 for
a list of the possible MXU Status
conditions.
8
5
Note
Number
HH/TRHH/
RRVE/RR
Export Note Code Number associated with
the entry of a Note transaction by
the reader.
4
Note Text HH/TRHH/
RRVE/RR
Export Note Code Text from the entry of a
Note entered by the reader.
50
Number of
Reading
Digits
All Imp/Exp Number of digits that are read on an
individual meter.
2
Parcel
Number
All Imp/Exp Parcel number associated with
meter location.
20
Port
Channel
All Imp/Exp MultiRead Port Expander Channel
Identifier
1
Port ID HH/RRVE/
RRCI/PR
Imp/Exp Port ID String 14
Port
Number
HH/RRVE/
RRCI/PR
Imp/Exp MXU or MIU Port Number 1
Appendix B: Import and Export Field Names | 148
To Next Page
Loading...
Need help?
General
