Field
Name
Protocols Imp/Exp Function Max
Width
Notes
View
Alternate
Number
CI/PR Export View Command issued to obtain the
Alternate Number that is currently
set in the MIU.
50
View
Emergency
Number
CI/PR Export View Command issued to obtain the
Emergency Number that is currently
set in the MIU.
50
View
Modes
CI/PR Export View command issued to obtain
the mode settings (time, error, tone,
ring, and tamper) that are current
set in the MIU.
16
View
Primary
Number
CI/PR Export View Command issued to obtain the
Primary Number that is currently set
in the MIU.
50
View Ring
Timer
CI/PR Export View command issued to obtain the
current Ring Timer setting of the
MIU.
3
Work Order and Flexnet Programmer Fields
Field
Name
Protocols Imp/Exp Function Max
Width
Notes
Communication
Device ID
HH/TRHH/
RR
Export ID number of the transmitter as
recorded in the work order.
40
Communication
Device
Manufactured
Date
HH/TRHH/
RR
Export Manufacture Date of transmitter as
recorded in the work order.
19
Communication
Device
Type
HH/TRHH/
RR
Export Type or model information of the
transmitter as recorded in the work
order.
1
Flexnet
Compensation
Factor
HH/TRHH/
RR
Export Number between 1 and 4
used to determine pulse count
on Temperature/Pressure
compensated indexes. Entered
during programming.
15
Flexnet
Endpoint
ID
HH/TRHH/
RR
Export The actual endpoint ID programmed
via the HHD.
15
Flexnet
Index Drive
HH/TRHH/
RR
Export Number of volume measurement
units per revolution in direct mount
or per pulse if a remote mount is
selected. May be set to 1, 2, 5, 10,
20, or 100 and is entered during
programming.
5
Flexnet
Index Scale
HH/TRHH/
RR
Export Hundreds of Cubic Feet, Thousands
of Cubic Feet, or Cubic Meters.
Expressed as CCF, MCF, or Cubic
Meters and is entered during
programming.
5
Flexnet
Latitude
HH/TRHH/
RR
Export The latitude collected via the
programming tool at the location
programming was performed.
20
Appendix B: Import and Export Field Names | 152
To Next Page
Loading...
Need help?
General
