Note: It is possible to load more than one route into a single HHD. Please refer to Section
7.1 Loading Multiple Routes, for more information if needed.
3. Clear. Once the route to be processed is selected, ensure that the route is Cleared
so that it can accept the new route data of the current set of meters to be processed.
By now, any existing data in the HHD should have been Read and Backed Up. Before
Clearing a route, be sure that the correct route is selected.
a) Select the Function drop-down menu above the route listings. In some cases, it
may be necessary to scroll to the top of the list in the drop-down menu to see the
Clear function.
b) Click the Clear command.
The word Clear will now appear in the Function menu.
4 HHD Process Routes | 47
To Next Page
Loading...
Need help?
General
