21 PAGER Enables/disables the Enhanced
CTCSS Paging & Code Squelch
function.
TX CTCSS of 2 tone
RX CTCSS of 2 tone
Enables/Disables the Answer Back
(acknowledgement) function.
CODE for 2tone.
P
AGER: ON / OFF
RX: ** **
TX: ** **
ACK : ON / OFF
P
AGER=OFF
RX=05 47
TX=05 47
ACK=OFF
22 P
ASSWORD Enables/disables the Password
feature
PWD.OFF / PWD. ON / WRITE PWD.OFF
23 PRI.RVT Enables/disables the Priority
Revert feature.
RVT.OFF / RVT. ON RVT.OFF
24 REPEATER ARS/MODE/SHIFT function setting ARS= ON / OFF
MODE= +RTP / -RTP / SIMPLEX
SHIFT=
xx.xxMHz
ARS ON
MODE SIMPLEX
SHIFT=1.60M
25 RESUME Selects the Scan Resume mode. BUSY/HOLD/TIME BUSY
26 RF SQL Adjusts the RF Squelch threshold
level.
S-1 / S-2 / S-3 / S-4 / S-5 / -6 / S-8
/ S-FULL / OFF
OFF
27 SCN.LAMP Enables/Disables the Scan lamp
while paused.
ON / OFF ON
28 SCRABLE Inversion scrambling (Encryption) SCRB.ON/SCRB.OFF SCRB.OFF
29 SKIP Selects the Memory Scan “Skip”
channel-selection mode.
Selective Skip MEM
30 SQL TYPE Selects the Tone Encoder and/or
Decoder mode.
OFF / TONE / TSQL / REV TN /
DCS / ECS
OFF
31 STEP Setting of the synthesizer steps. 5 / 10 / 12.5 / 15 / 20 / 25 / 50 /
100 kHz, or AUTO
AUTO
32 TOT Setting of the TOT time. 1min - 30min or OFF 3min
33 TX PWR Select TX Power LOW(0.5W) / MID(2.5W) / HI(5W) HI(5W)
34 TX SAVE Enables/Disables the Transmitter
Battery Saver.
SAVE OFF / SAVE ON SAVE OFF
35 VFO.SPL Enables or disables “VFO Split”
operation.
VSP.OFF / VSP.ON VSP.OFF
36 VOX Enable / Disable VOX function. VOX OFF / VOX ON VOX OFF
37 WFM.RCV Broadband FM Radio(WFM)
function Enables/Disables
WFM.ON / WFM.OFF / WFM.OLY WFM.ON
38 WIDE/NAR Select Wide (±5 kHz) or Narrow
(±2.5 kHz) TX Deviation.
WIDE / NARROW WIDE
39 WX ALERT Enables/Disables the Weather
Alert Scan feature.
ALT.OFF / ALT. ON ALT.OFF
26
To Next Page
Loading...
