Yaesu FT-65R/E User Manual

OperatiOn
switChing pOwer On and OFF

Be sure the Battery Pack is installed, and that the
battery is fully charged. Connect the antenna to
the top panel Antenna jack.

Rotate the top panel’
s PWR/VOL knob out of the
click-stop to turn on the radio. The current DC
supply voltage will be indicated on the display for
2 seconds. After this 2 second interval, the dis
-
play will resume its normal indication of the oper-
ating frequency.

T
o turn the radio off, turn the PWR/VOL knob fully counter-clockwise into the
click stop position.
adjusting the audiO vOluMe level and squelCh setting

You may rotate The PWR/VOL knob to adjust
the receiver level for a comfortable listing level,
using the background noise as a reference.

T
o set the squelch level, press F/W key and then
press MONI/T.CALL Switch to open the SQ
LEVEL mode.
Press
the
[

] or [

] key
to select the level which
the background noise is muted.
P
ress PTT switch to save the squelch setting
and back to the normal operation.
seleCting the Operating band

Press the [
#BAND
] key repetitively. This key tog-
gles frequency control between 144 MHz Band
and
430 MHz Band each time you press the
[
#BAND
] key.

Once you have selected the desired band, you
may initiate manual tuning (or scanning) per the
discussioninthenextchapter.
Frequency Range
RX TX RX TX
USA model 136-174 MHz 144-148 MHz 400-480 MHz 430-450 MHz
EU model 136-174 MHz 144-146 MHz 400-480 MHz 430-440 MHz
EXP model 136-174 MHz 136-174 MHz 400-480 MHz 400-470 MHz
6
FT-65R/E Operating Manual
ApplicationforFCC/IC
FCCID:K6620665X20/IC:511B-20665X20

Yaesu FT-65R/E Specifications

General

Brand	Yaesu
Model	FT-65R/E
Category	Transceiver
Language	English