INSTALL
1. Install one of the bearings into the load wheel and
install the spacer.
2. Install the other bearing into the load wheel.
3. Install the bushings into both ends of the load
wheel.
4. Align the load wheel assembly with the opening in
the rear link.
5. Install the axle capscrew.
6. Connect the battery and turn the key switch to the
ON position. Press the lift button to raise the front
forks.
7. Remove the blocks from the lift truck and press
the lower button to lower the forks.
8. Test operation of the lift truck before returning the
truck to service.
1. BUSHING
2. LEVER
3. BUSHING
4. BALL BEARING
5. ROLLER
6. SPACER
7. LOAD WHEEL
8. CAPSCREW
Figure 1. Single Load Wheel Assembly
1. BUSHING
2. LEVER
3. WASHER
4. ROCKER PLATE
5. BUSHING
6. CAPSCREW
7. LOAD WHEEL
8. BUSHING
9. BALL BEARING
10. ROLLER
11. SPACER
Figure 2. Tandem Load Wheel Assembly
Caster Wheels 4000 YRM 1509
2
To Next Page
Loading...