General
This section contains repair and maintenance
procedures for the AC traction motor. Additional
information concerning the traction motor may be
included in other sections when the information is
more closely related to other systems. Sections that
may contain related information include:
• Periodic Maintenance 8000YRM1510
for lift truck model A249
• Periodic Maintenance 8000YRM1666
for lift truck model A245
• Steering Mechanism 1600YRM1504
• Electrical System 2200YRM1508
ACCESSING THE DRIVE UNIT
COMPARTMENT
The drive unit compartment is concealed behind a
molded cover which fits securely around the drive unit
and steer support to the frame.
To remove the drive unit cover, first remove the two
nuts securing the cover to the frame. Starting at the
top left edge of the cover and with both hands pull the
cover away from the frame until the cover kicks out
from the retaining clips. Repeat this for the right side
of the cover. Work around the edge of the cover until
free from the truck. See Figure 1.
1. DRIVE UNIT COMPARTMENT COVER
2. NUTS
3. RETAINING CLIPS
4. FRAME
Figure 1. Drive Unit Compartment Cover A249
0620 YRM 1513 General
1
To Next Page
Loading...