DTC 30080 (Cont)
OverHeat
CAUSE B - FAULTY TRACTION CONTROLLER
PROCEDURE OR ACTION:
1. If no faults are found, replace controller. Make sure to indicate the DTC code(s) on the warranty claim to in-
clude an accurate problem description leading to controller replacement.
END POSSIBLE CAUSES
DTC 30080 OVERHEAT DIAGRAMS
Traction Motor
END FAULT
ELECTRICAL SYSTEM Diagnostic Trouble Codes
Check the Service Manual section in Yale Axcess Online for possible updates and check pertinent Bulletins
9030-20-37
To Next Page
Loading...