18
P/N - - Rev AYRL LPBINSTL FUL
Resetting Lock to Factory Default
Reset Button
Interior Lock
When resetting the lock, all user codes, including the Master code*,PIN
are deleted. All programming features are reset to original default
settings. See “Factory Settings”.
1. Remove the battery cover and batteries.
2. Remove the interior lock to access the reset button.
3. The reset button (see image above) is marked.
4. Re-insert 3 batteries and hold the reset button for 3 seconds.
5. While still holding the reset button, insert the 4th battery, and hold the
reset button for an additional 3 seconds.
6. Release the reset button.
7. Re-install the interior lock onto the door.
*Upon reset, Master Code creation is the only option available andPIN
must be performed prior to any other programming of the lock.
To Next Page
Loading...
