P/N - - Rev AYRL LPBINSTL FUL
19
Changing Lock: Replacing Cylinder
Factory Settings
*The Master code must be created prior to any other programming of the lock.PIN
Registration
required*
Settings
Factory Setting
Master CodePIN
Automatic Re-lock
Disabled
Lockout Mode
Disabled
Wrong Code Entry Limit
5 Times
Shutdown Time 60 Seconds
Audio Mode
Enabled
One Touch Locking
Enabled
Inside Indicator Light
Disabled (Off)
Automatic Re-lock Time
30 Seconds
1.To Remove cylinder:
See installation Step 6 "Installing Exterior Lever" and reverse appropriate
actions to remove the exterior lever handle and cylinder.
2.To install new cylinder:
A. Follow appropriate actions of installation Step 6 "Installing Exterior
Lever" to replace the cylinder and exterior lever handle.
B. Test operation of new cylinder and key by following "Testing Operation".
To Next Page
Loading...
