Yale iM1 Network Module
®
Installation and Programming Instructions
®
Installing the Yale iM1 Network Module
IMPORTANT: the batteries be removed priormust
to removing and/or inserting the network module:
• Remove battery cover and batteries.
• Remove and/or insert Network Module.
• Reinstall batteries and battery cover.
Enrolling the iM1 Network Module:
The Yale iM1 Network Module must be used with a Yale Assure Lock or Yale nexTouch
Lock and cannot be used in conjunction with any other Yale Network Module.
To Enroll the Module:
•Enter the 4-8 digit Master code followed by the key.PIN
•Press the key followed by the key.
•Press the key followed by the key.
P/N 202- - - Rev CAYR iM1 INSTAL FUL
To Next Page
Loading...
