214 Digital I/O, Setup, and Utilities
02R User’s Guide
Communication Speed
The Communications Speed section of the UTILITY 4/4 page allows you to
monitor the TO HOST port speed, and is for use with computer software
such as Project Manager or Visualizer. The controlling host computer
automatically configures the communication speed, so you don’t have to
worry about these settings. Once communications between the 02R and
host computer have been established, you can change the communication
speed on the computer only, and the check boxes on the UTILITY 4/4 page
are grayed out.
The *1 speed is the default at 38.4 kbps.
1. Use the [UTILITY] button
to locate the UTILITY 4/4
page.
UTILITY
To Next Page
Loading...
