Yamaha CL1 - Page 63

CL Editor Owner’s Manual
63
PREMIUM page
1 Mount
Select a PREMIUM rack module (EQ or compressor) for mounting in the rack, from the following choices: BLANK,
Portico5033 (DUAL/STEREO), Portico5034 (DUAL/STEREO), U76 (DUAL/STEREO), Opt-2A (DUAL/STEREO),
EQ-1A (DUAL/STEREO), and DynamicEQ (DUAL/STEREO.)
2 Input patch
Click the CHANNEL field (Click L CHANNEL or R CHANNEL area for the stereo EQ or compressor), and choose one
of the following as the signal route that will be patched to the input channel(s) of the currently selected PREMIUM rack
module.
(*) CL3: 1-64, CL1: 1-48
NONE No assignment
MIX 1–24 MIX channel 1–24 (only for rack 1-2)
MATRIX1–8 MATRIX channel 1–8 (only for rack 1-2)
ST L, ST R, MONO(C) STEREO channel L/R, MONO channel (only for rack 1-2)
INS CH 1–72(*) INPUT CH 1–72(*) insert out
INS MIX 1–24 MIX channel 1–24 insert out
INS MTRX1–8 MATRIX channel 1–8 insert out
INS ST L, INS ST R, INS M(C) Insert-out of STEREO channel L/R or the MONO channel
1 2 3 4 56