Yamaha DM 2000 - Page 285

Effects Parameters 271
DM2000—Owner’s Manual
TREMOLO
Two input, two output tremolo effect.
HQ. PITCH
One input, two output high-quality pitch shifter.
Parameter Range Description
FREQ.
0.05–40.00 Hz Modulation speed
DEPTH
0–100% Modulation depth
WAVE
Sine, Tri, Square Modulation waveform
LSH F
21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G
–12 to +12 dB Low shelving filter gain
EQ F
100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G
–12 to +12 dB EQ (peaking type) gain
EQ Q
10.0–0.10 EQ (peaking type) bandwidth
HSH F
50.0 Hz–16.0 kHz High shelving filter frequency
HSH G
–12 to +12 dB High shelving filter gain
SYNC
OFF/ON Tempo parameter sync on/off
NOTE
1
1.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
PITCH
–12 to +12 semitones Pitch shift
FINE
–50 to +50 cents Pitch shift fine
DELAY
0.0–1000.0 ms Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
MODE
1–10 Pitch shift precision
SYNC
OFF/ON Tempo parameter sync on/off
NOTE
1
1. (Maximum value depends on the
tempo setting)
Used in conjunction with TEMPO to determine DELAY