Yamaha DM 2000 - Compressing the Stereo out; Grouping Master Compressors; Muting the Stereo out (ON;OFF); Grouping Master Mutes (ON;OFF)

Compressing the Stereo Out 83
DM2000—Owner’s Manual
Compressing the Stereo Out
Signal dynamics can be controlled by using the Stereo Out Compressor. See “Compressing
Channels” on page 113 for more information.
Grouping Master Compressors
The Stereo Out Compressor can be grouped with the Compressors of other Output Chan-
nels. See “Grouping Output Channel Compressors” on page 116 for more information.
Muting the Stereo Out (ON/OFF)
The Stereo Out can be muted by using the STEREO [ON] button, which is used
exclusively for this task and is not affected by the Layers. Its indicator lights up
when the Stereo Out is on.
Grouping Master Mutes (ON/OFF)
The Stereo Out Mute can be grouped with the Mutes of other Output Channels. See
“Grouping Output Channel Mutes (ON/OFF)” on page 123 for more information.
Setting the Stereo Out Level
The Stereo Out level is set by using the STEREO fader, which is used exclu-
sively for this task and is not affected by the Layers or Fader modes.
Grouping Master Faders
The Stereo Out fader can be grouped with the faders of other Output Channels. See
“Grouping Output Channel Faders” on page 122 for more information.
Sending the Stereo Out to the Matrix Sends
The left and right channels of the Stereo Out can be sent individually to the Matrix Sends.
See “Matrix Sends” on page 97 for more information.
ON
STEREO
70
60
50
40
30
20
15
10
5
0