39
ENGLISH
2-8. REMOTE CONTROL “LEARNING” FUNCTION
The remote control unit, in addition to controlling the most
commonly used functions of the main unit and other connected
Yamaha audio and video equipment, has a sophisticated “learning”
function that allows it to control other equipment in your system or
other household appliances equipped with infrared remote control
receivers. By setting the YPC/USER/LEARN switch on the remote
control unit to Learn mode, all keys will turn into “learnable function
keys”, each capable of “learning” a different remote control function.
Also, each key can learn two different functions by switching the
learning page (1 or 2) with the 1/2 switch. However, as for the keys
shaded in the following figure, the PARAMETER/SET MENU switch
will select the learning page number (1 or 2) instead of the 1/2
switch.
Learning a New Remote Control Function
1. Select the learning page number (1 or 2) by using the 1/2 switch.
2. Set the YPC/USER/LEARN switch to Learn mode.
3. Press the key that is to have a new function assigned to it. The
TRANSMIT/LEARN indicator will illuminate.
4. Aim the infrared transmitter window of the other remote control
unit. Press and hold down the button on the other remote control unit
corresponding to the new function to be learned. Hold the button
down until the TRANSMIT/LEARN indicator is extinguished. The
function has now been learned.
5. Repeat steps 3 and 4 to learn additional functions.
6. Set the YPC/USER/LEARN switch to User mode. Pressing the
learned key will now perform the assigned function. Provided user
program sheets should be used to record the functions learned by
the various keys.
To Next Page
Loading...
Need help?
General
