Yamaha DTX402K User Manual

Setting Parameters using Menu Mode
47
Advanced Techniques
DTX402K DTX432K DTX452K Owner’s Manual
4-4. Foot Close Velocity
You can adjust the velocity (or power) of foot-close sounds
produced using the hi-hat controller.
1. Hold down the Mode switch to activate Menu Mode.
2. Press number button [4] to select the Hi-hat Settings
parameter group.
3. Press number button [4] to select the Foot Close
Velocity parameter.
4. Enter a new velocity using the TEMPO[+]/[–] buttons.
4-5. Kick Velocity
You can adjust the velocity (or power) of kick sounds pro-
duced using the hi-hat controller. In order for the Kick
Velocity parameter to have an effect, Double Bass Drum
must be set to “On” for the current kit (page 44).
1. Hold down the Mode switch to activate Menu Mode.
2. Press number button [4] to select the Hi-hat Settings
parameter group.
3. Press number button [5] to select the Kick Velocity
parameter.
4. Enter a new velocity using the TEMPO[+]/[–] buttons.
Steps:
Hold down the Mode switch  [4]  [4]  Setting
This parameter only has an effect when you are
using an HH40 Hi-hat Controller.
Setting
1 to 127
Setting
Steps:
Hold down the Mode switch  [4]  [5]  Setting
This parameter only has an effect when you are
using an HH40 Hi-hat Controller.
Setting
1 to 127
Setting

Yamaha DTX402K Specifications

General

Type	Drum system
Crash cymbal	Yes
Number of pieces	- pc(s)
Drum sound types	Crash, Hi-hat, Kick, Ride, Snare drum, Tom
Drum kits quantity	10
USB connector type	USB Type-B
Maximum polyphony (notes)	64
Power source type	-
Power consumption (typical)	5 W

Weight and Dimensions

Sound module weight	500 g
Sound module dimensions (W x D x H)	269 x 39 x 147 mm