Setting Parameters using Menu Mode
54
Advanced Techniques
DTX402K DTX432K DTX452K Owner’s Manual
7-3. USB Audio Output Settings
You can set whether the USB audio input is sent to the USB
out or not. When set to “Output,” the audio data input from
a PC (for example) is mixed with your pad performance and
they are sent together to the USB out. When set to “Not out-
put,” only your pad performance is sent to the USB out,
even if the audio data is input and played from the PC.
1. Hold down the Mode switch to activate Menu Mode.
2. Press the number button [7] to select the Other Set-
tings.
3. Press the number button [3] to select USB Audio Out-
put Settings.
4. Select the parameter using the number button [1] or
[2].
7-4. USB Audio Output Gain
When USB Audio Output Setting is set to “Output,” you can
set the output gain level.
1. Hold down the Mode switch to activate Menu Mode.
2. Press the number button [7] to select the Other Set-
tings.
3. Press the number button [4] to select USB Audio Out-
put Gain.
4. Select the gain level using the number button [1] to
[5].
7-5. Auto Power-Off Time
You can set the time until the Auto Power-Off function
(page 22) activates or you can disable this function.
1. Hold down the Mode switch to activate Menu Mode.
2. Press the number button [7] to select the Other Set-
tings.
3. Press the number button [5] to select Auto Power-Off
Time.
4. Set a time or disable this function using the number
button [1] to [7].
Steps:
Hold down the Mode switch [7] [3] Setting
Number button Setting
[1] Not output
[2] Output
Steps:
Hold down the Mode switch [7] [4] Setting
Number button Setting
[1] -12 dB
[2] -6 dB
[3] 0 dB
[4] +6 dB
[5] +12 dB
Steps:
Hold down the Mode switch [7] [5] Setting
Number button Setting
[1] Auto Power-Off disabled
[2] 5 minutes
[3] 10 minutes
[4] 15 minutes
[5] 30 minutes (default)
[6] 60 minutes
[7] 120 minutes
To Next Page
Loading...
Need help?
General
Weight and Dimensions
