2-3
EMC25010
GEAR SHIFT LEVER (for Tiller control
model)
Turning the gear-shift lever towards you
engages the clutch with the forward gear
so that the boat moves ahead. Turning
the lever away from you engages the
reverse gear so that the boat moves
astern.
1 Neutral
2 Forward
3 Reverse
E
226011
209014
225011
EMC42210
CHOKE KNOB
Pulling out this knob (setting it to ON)
supplies a rich mixture required to start
the engine.
EMC44010
RECOIL STARTER HANDLE
(If equipped)
Pull the handle gently until resistance is
felt. Then vigorously pull the handle
straight out to crank the engine to start it.
EMC46010
STARTER BUTTON (for Tiller control
model)
When you push the starter button, the
electric starter motor cranks the engine to
start it.
66M-9-17-2 2/27/03 10:10 AM Page 4
To Next Page
Loading...
