3-7
EMF43010
Controls
8 Check throttle, shift, and steering for
proper operation before starting the
engine.
8 The controls should work smoothly,
without binding or unusual free play.
8 Look for loose or damaged connec-
tions.
8 Check operation of the starter and stop
switches when the outboard motor is in
the water.
EMF43511
Engine
8 Check the engine and engine mounting.
8 Look for loose or damaged fasteners.
8 Check the propeller for damage.
E
201012
w
e
q
EMU01436
CHECKING THE ENGINE OIL LEVEL
1) Put the outboard motor in an upright
position (not tilted).
2) Pull out the oil dipstick and wipe it
clean.
3) Completely re-insert the dipstick and
pull out it again.
4) Check the oil level using the dipstick
to be sure the level falls between the
upper and lower marks. Fill with oil if
it is below the lower mark, or drain to
the specified level if it is above the
upper mark.
1 Oil dipstick
2 Lower level mark
3 Upper level mark
66M-9-17-3 2/27/03 10:30 AM Page 8
To Next Page
Loading...
Need help?
General
