Yamaha F15C - Page 65

3-26
E
304045
UP
DN
701034
UP
DN
000610
DN UP
000603
EMU01312
PROCEDURE FOR TILTING UP
Power tilt model
1) Remove the fuel-line connection from
the motor.
2) Push the power tilt switch “UP” until
the outboard has tilted up completely.
3) Push the tilt support knob into the
clamp bracket to support the engine.
w
After tilting the engine, be sure to sup-
port it with the tilt support knob.
Otherwise, the engine could fall back
down suddenly if oil in the power tilt unit
should lose pressure.
66M-9-17-3 2/27/03 10:30 AM Page 27