4-4
E
EMU00327
Clamp handle mounting model
When transporting or storing the out-
board motor while removed from a boat,
fold the tiller handle and lean the motor
on the tiller handle to keep in a horizontal
position.
cC
Keep the power unit higher than the pro-
peller at all times. Otherwise, cooling
water can run into the cylinder, which
could result in damage.
NOTE:
Place a towel or the like under the out-
board motor to protect it from damage.
66M-9-17-4 3/13/03 9:35 AM Page 5
To Next Page
Loading...
