2-11
ELECTRICAL SPECIFICATIONS
Starter motor
Brush overall length limit 6.5 mm (0.26 in)
Mica undercut (depth) 0.70 mm (0.03 in)
Fuel sender unit
Sender unit resistance (full) 9.0–11.0 Ω
Sender unit resistance (empty) 213.0–219.0 Ω
Fuel injection sensor
Crankshaft position sensor resistance 228–342 Ω
Intake air temperature sensor resistance 5400–6600 Ω at 0 °C (5400–6600 Ω at 32 °F)
Intake air temperature sensor resistance 289–391 Ω at 80 °C (289–391 Ω at 176 °F)
Intake air pressure sensor output voltage 3.59–3.67 V at 101.3 kPa (3.59–3.67 V at 1.01
kgf/cm², 3.59–3.67 V at 14.7 psi)
Coolant temperature sensor resistance 2513–2777 Ω at 20 °C (2513–2777 Ω at 68 °F)
Coolant temperature sensor resistance 210–221 Ω at 100 °C (210–221 Ω at 212 °F)
Fuse(s)
Main fuse 50.0 A
Headlight fuse 7.5 A
Brake light fuse 2.0 A (MTN890D)
Signaling system fuse 7.5 A
Ignition fuse 10.0 A
Radiator fan motor fuse 15.0 A
ABS ECU fuse 7.5 A
Fuel injection system fuse 7.5 A
ABS motor fuse 30.0 A
ABS solenoid fuse 15.0 A
Terminal fuse 1 2.0 A
Backup fuse 7.5 A
Cruise control fuse 2.0 A (MTN890D)
Electronic throttle valve fuse 7.5 A
Ignition fuse 2 7.5 A
Backup fuse 2 15.0 A
To Next Page
Loading...
