Yamaha RY30 - 16: Voice Initialize

VOICE EDIT MODE
VOICE INITIALIZE
Voice edit mode/Page 16
Notes: This function is handy if you want to com-
pletely reprogram all voice parameters from
scratch. Here’s a list
of the initialized voice
parameter values:
Summary: Initializes all parameters of the selected
voice except waves and the voice name to their
“normal” values.
Settings: Voice: I00 . . . I95 (internal), C00 . . . C31
(card)
Procedure: Use the [INC] and [DEC] keys, the
[DATA] slider, or the instrument pads to select
the voice to be initialized.
Press the [ENTER] key — “Sure” will
appear on the display. Press the [ENTER] key
again to initialize the voice or press [EXIT] to
cancel the operation. “Complete!” will appear on
the display briefly when the voice has been
initialized.
92