Yamaha RY30 - 08: Sensitivity Job Select; Job 01: Level Sensitivity; Job 02: Pitch Sensitivity; Job 03: Eg Sensitivity

VOICE EDIT MODE
SENSITIVITY JOB SELECT Voice edit mode/Page 08
l l JOB 02: PITCH SENSITIVITY
Summary: Allows any of the four sensitivity jobs
described below to be selected.
Settings: None
Procedure: Press [ENTER] and then use the
[PAGE-] and [PAGE+] keys to select the de-
sired job.
Press [EXIT] to exit from the sensitivity job
mode and return to “SENSITIVITY ?” display
(page 08).
l l JOB 01: LEVEL SENSITIVIYY
Summary: Determines how the wave 1 and wave 2
output levels change in response to velocity
changes (e.g. pad/keyboard dynamics).
Settings: Wave 1 level sensitivity: -7 . . . +7
Wave 2 level sensitivity: -7 . . . +7
Procedure: Use the and keys to move the
cursor to the wave 1 level sensitivity or wave 2
level sensitivity parameter, then use the [INC]
and [DEC] keys, the [DATA] slider, or the
numeric keys to set as required.
Notes: Plus “+” settings produce higher level in
response to higher velocity values — i.e. the
harder a pad or key is played, the higher the vol-
ume. The maximum setting of “+7” produces the
maximum level variation in response to velocity
changes. Minus “-”
settings produce the oppo-
site effect: lower volume in response to higher
velocity. A setting of “±0” results in no level
variation.
Summary: Determines how the wave 1 and wave 2
pitches change in response to velocity changes
(e.g. pad/keyboard dynamics).
Settings: Wave 1 pitch sensitivity: -7 . . . +7
Wave 2 pitch sensitivity: -7 . . . +7
Procedure: Use the and keys to move the
cursor to the wave 1 pitch sensitivity or wave 2
pitch sensitivity parameter, then use the [INC]
and [DEC] keys, the [DATA] slider, or the
numeric keys to set as required.
Notes: Plus “+" settings produce higher pitch in
response to higher velocity values — i.e. the
harder a pad or key is played, the higher the
pitch. The maximum setting of “+7” produces
the maximum pitch variation in response to
velocity changes. Minus “-” settings produce the
opposite effect: lower pitch in response to higher
velocity. A setting of “±0” results in no pitch
variation.
l JOB 03: EG SENSITIVITY
Summary: Determines how the attack and decay
times of wave 1 and wave 2 envelope generators
(EGs) change in response to velocity changes
(e.g. pad/keyboard dynamics).
87