To Next PageTo Next Page
Need help?Do you have a question about the Yamaha S08 and is the answer not in the manual?
General| Brand | Yamaha |
|---|---|
| Model | S08 |
| Category | Synthesizer |
| Language | English |
Important information regarding battery usage, safety, and disposal procedures.
Details on locating the product's name plate and Yamaha's environmental considerations.
Critical instructions for FCC compliance, including modifications and cable specifications.
Information on potential interference and how to ensure FCC compliance for the device.
Essential warnings to prevent serious injury or hazards related to power, water, and fire.
Cautions to prevent physical injury or damage to the instrument and property.
Identifies and describes the controls located on the instrument's top panel.
Details the various input/output jacks and terminals on the rear panel.
Guides on connecting the power adapter and initial setup.
Steps for powering on the instrument and connected audio equipment.
Instructions for connecting speakers and mixers for sound output.
Details on connecting MIDI keyboards, sequencers, and computers.
Explains the two primary methods for connecting the S08 to a computer.
Adjusting Local On/Off for proper MIDI communication with a computer.
Information on connecting optional foot switches and controllers.
How to select and play the instrument's built-in demo songs.
Describes the main functional blocks: Controller, Tone Generator, Effects, Card Drive/Sequencer.
Explains how Voices and Multis are stored in internal memory.
Differentiates between Normal and Drum Voices and their assignments.
How to set the Part Mode for Normal or Drum Voices.
Explains the organization of the S08 into various operational modes.
Guides on how to enter and exit different operational modes.
How to switch between different screens and pages using navigation buttons.
How to use the +/- buttons for selecting parts or elements.
Instructions for cursor movement and data input using keypads and buttons.
Explains how to adjust values and confirm selections.
Method for entering parameter values using the numeric keypad and ENTER button.
Explains the difference between absolute and relative parameter settings.
How to access and select different voice memory groups.
Methods for selecting specific voice numbers using buttons or keypad.
How to browse through the different banks of GM2/XG voices.
Guide to selecting banks within the GM2/XG voice memory.
How to quickly find voices by their category.
Basic steps to select and play Multis.
How to choose a specific Multi from the USER memory.
How to play live parts while a song file is playing.
Setting up split points for different voices across the keyboard.
Functionality and control of the pitch bend and modulation wheels.
How to assign and use the AC1 controller for sound manipulation.
Setting up the foot controller to manage various parameters.
Using the foot switch to change presets or programs.
Steps to access and begin editing a selected Voice.
Explains editing common settings and individual voice elements.
How to mute elements to isolate and edit specific sounds.
Comparing edited sounds with original settings.
Covers General, Controller, and Effect common parameters for Voices.
Details on OSC/MIX, Element Switch, Wave Number, Level, Pan, and Limit settings.
How to check and mute elements to facilitate the editing process.
Adjusting the filter's cutoff frequency and resonance for tonal shaping.
Controlling pitch changes over time using PEG parameters.
Shaping tonal characteristics using FEG parameters for dynamic changes.
Setting volume levels and controlling amplitude changes over time.
Shaping volume changes over time using AEG parameters.
Utilizing LFOs to create vibrato, wah, and tremolo effects.
Adjusting effect parameters and saving the edited Voice.
Details on the types and application of Reverb, Chorus, and Variation effects.
Explains the difference between System and Insertion effects.
A practical example of editing effect settings in Voice Edit mode.
How effects are applied and controlled within Voice mode.
How effects are applied and controlled within Multi mode.
Steps to perform Jobs like initializing or copying parameters.
How to copy element or drum key settings between parts of a Voice.
Transmitting S08 settings to an external device for backup.
Copying variation effect and controller settings between parts.
Copying entire part parameter settings within a Multi.
Procedure for saving instrument settings to a memory card.
Explains the meaning of the 'E' indicator signifying unsaved edits.
How to create sequences of songs for continuous playback.
Steps for playing individual songs and executing chained playback.
Adjusting the tempo for song playback.
Using InitSeq and SeqAll jobs for sequence management.
Precautions for inserting, removing, and handling memory cards.
Instructions for formatting cards and using write-protect seals.
Recommendations for backing up data and using the burglarproof lock.
Step-by-step guide for saving instrument data to a memory card.
Process for loading data from a memory card back to the instrument.
Procedures for renaming and deleting files on the memory card.
Formatting cards and importing data from the Voice Editor library.
Resolving issues with file transfer and voice name display via Card Filer.
Troubleshooting USB connection problems and computer hangs.
Detailed explanation of common parameters for editing normal voices.
Detailed settings for Oscillator/Mixer and Pitch Envelope Generator.
Comprehensive details on filter cutoff, resonance, and scaling settings.
Settings for amplitude envelope and low-frequency oscillators.
Editing common settings and individual drum key parameters.
Explains Initialize, Copy, Bulk Dump, and Store jobs for Voices.
Settings applicable to all parts within a Multi.
Detailed settings for common parameters across all parts in a Multi.
Specific settings for each of the 16 parts within a Multi.
Operations like Initialize, Copy Variation Effect, Copy Controller, Copy Part, and Bulk Dump for Multis.
Managing song chains and playback.
System settings including Tone Generator, MIDI Channels, and MIDI Filter.
Configuring controllers like Modulation Wheel, Footswitch, and AC1.
Managing files and formatting memory cards.
How MIDI channels enable simultaneous multi-part communication.
Data related to keyboard performance on specific channels.
How Control Change messages modify parameters like volume, pan, and modulation.
Explains specific Control Change messages for Release Time, Attack Time, Brightness, etc.
Using NRPN for detailed parameter adjustments like vibrato and filter settings.
Using RPN and NRPN for precise parameter settings.
Understanding Channel Mode messages and Aftertouch types.
How SysEx messages control instrument functions like GM, GM2, XG, and Master Volume.
Explains Active Sensing messages and their effect on instrument behavior.
A systematic approach to diagnosing and resolving no-sound issues.
Verifying settings related to volume, voice selection, and global parameters.
Diagnosing and fixing issues with distorted or too-soft sound.
Troubleshooting problems related to incorrect pitch or intermittent sound.
Resolving issues where effects are not applied or scaling settings have no effect.
Common issues with drum voices and editing restrictions.
Troubleshooting problems with controllers, LFOs, bulk data, and device communication.
A procedure to test the MIDI cable for proper signal conductivity.
Troubleshooting playback failures and memory card file management issues.
Resolving issues with file transfer and voice name display via Card Filer.
Troubleshooting USB connection problems and computer hangs.
