TROUBLESHOOTING
22 En
DAB reception
Problem Cause Solution
Cannot tune into any DAB
stations.
The initial scan operations were not
performed.
Perform the initial scan operations
(☞ P. 10).
There is no DAB coverage in your area. Check with your dealer or WorldDMB
Online at “http://www.worlddab.org” for a
listing of the DAB coverage in your area.
The DAB signals are too weak. Change the height, direction, or placement
of the antenna.
The initial scan operations
are not successful and “Not
found” appears on the DAB
information display.
The DAB signals are too weak.
There is no DAB coverage in your area. Check with your dealer or WorldDMB
Online at “http://www.worlddab.org” for a
listing of the DAB coverage in your area.
The DAB station reception is
weak.
The DAB signals are too weak. Change the height, direction, or placement
of the antenna.
There is noise interference
(e.g. hiss, crackle or jitter).
The antenna needs to be repositioned.
The DAB signals are too weak.
The DAB station information
does not appear or is
inaccurate.
The DAB station may be temporarily out
of service, or the DAB station
information is not provided by the DAB
broadcaster.
Contact the DAB broadcaster.
FM reception
Problem Cause Solution
Too much noise during
stereo broadcast.
The antenna may be connected
improperly.
Make sure the antenna is connected
properly (☞ P. 4).
The radio station you selected may be far
from your area, or the radio wave
reception is weak in your area.
Try manual tuning to improve the signal
quality (☞ P. 13) or use a multi-channel
outdoor antenna.
Even with an outdoor antenna,
radio wave reception is weak.
(Sound is distorted.)
Multipath reflection or other radio
interferences may have occurred.
Change the height, direction, or placement
of the antenna.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
