LISTENING TO DAB STATIONS
18 En
OPERATION
You can set the following functions in DAB FUNCTION
menu.
The following are operation examples.
■ Operation example 1
PRESET DELETE, STATION ORDER and DRC MODE
1 While receiving DAB, select the
function you want to use from the
FUNCTION menu.
2 Select and set the desired setting.
For PRESET DELETE, select a preset number you
want to delete.
■ Operation example 2
DAB CLEAR and INIT SCAN
1 While receiving DAB, select DAB
CLEAR or INIT SCAN from the
FUNCTION menu.
2 To perform the function, press
Center.
If you select DAB CLEAR, all DAB information is
deleted; when INIT SCAN, the initial scan is
initiated.
Using DAB FUNCTION
Function Description
PRESET DELETE Deletes unnecessary preset DAB
stations.
STATION ORDER Enables you to change the station
order.
ALPHANUMERIC: Stations are
listed in alphabetical order.
ENSEMBLE: Stations are listed in
ensemble order.
The default setting is
“ALPHANUMERIC”.
DRC MODE Changes the DRC (☞ P. 16)
setting.
AUTO: This unit utilizes DRC
automatically if it is transmitted.
OFF: This unit does not utilize
DRC.
The default setting is “AUTO”.
DAB CLEAR Deletes all DAB station information
and preset settings stored in the unit.
After DAB CLEAR is complete,
this unit moves to the INIT SCAN
function automatically.
Note that once DAB CLEAR is
performed, the deleted information
and preset settings cannot be
restored.
INIT SCAN Performs the initial scan manually.
TUNE AID Measures reception strength of the
received signal (from 0 (none) to
100 (best)).
Refer to “TUNE AID” (☞ P. 19)
for this operation.
AUTO CLOCK Sets the clock status. Refer to
“Adjusting the time automatically”
(☞ P. 17) for this operation.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
