What to do if initial scan not successful on Yamaha Stereo System?
If the initial scan operations are not successful and 'Not Found' appears on the front panel display on your Yamaha Stereo System, the antenna may be connected improperly. Make sure the antenna is connected properly. Alternatively, there may be no DAB coverage in your area.
Why can't I tune into any DAB stations on my Yamaha Stereo System?
If you cannot tune into any DAB stations on your Yamaha Stereo System, it may be because the initial scan operations were not performed. The antenna may also be connected improperly. If those are not the problem, the DAB signals may be too weak, so change the height, direction, or placement of the antenna.
Why won't my Yamaha TSX-B235 Stereo System pair with another Bluetooth device?
Pairing issues can arise if the other component doesn't support A2DP. Ensure the other device supports A2DP. If a Bluetooth adapter is being used, it should have a password of “0000”. Also, the devices might be too far apart, so move them closer. Interference from devices emitting 2.4 GHz signals, like microwave ovens or wireless LANs, can also cause problems; move the unit away from such devices.
How to fix too much noise on Yamaha Stereo System?
Excessive noise could be due to an improperly connected antenna. Ensure the antenna is connected correctly. Alternatively, the antenna might be too close to the unit or another electronic device; try positioning it further away.
Why is there too much noise during stereo broadcast on my Yamaha Stereo System?
Excessive noise during stereo broadcasts may occur if the radio station is far away or the radio wave reception is weak. Try manual tuning to improve the signal quality.
How to fix cracked or distorted sound on Yamaha TSX-B235 Stereo System?
To resolve cracked, distorted, or abnormal noise issues on your Yamaha Stereo System, adjust the volume using the VOLUME control, or adjust the Bass with the EQ. If you are using an external device, lower its volume.
Why do my Yamaha TSX-B235 speakers make no sound?
There are several reasons why your speakers might not be producing sound. The volume could be set too low or muted, so try adjusting the volume level. The selected source might be incorrect, so ensure you've chosen the right one. If headphones are connected, remove them. Also, if you're using an external device, its volume might be too low, so increase its volume.
What to do if my Yamaha Stereo System remote control does not work properly?
If the remote control isn't working, it might be out of range. Also, direct sunlight or certain lighting could be interfering with the signal receiver on the unit. Try changing the lighting or the unit's orientation. The batteries could be worn out, so replace them. Finally, make sure there are no obstacles blocking the signal between the remote and the unit.
Why does my Yamaha Stereo System sound cracked or distorted?
Distorted sound or abnormal noise can occur if the input source volume or the unit's volume (especially bass) is too high. Try adjusting the volume using the VOLUME control or adjusting the bass with the EQ. If you are using an external device, lower its volume.
What to do if my Yamaha Stereo System turns off unexpectedly?
The auto power standby function may be enabled. This unit will turn off if 20 minutes pass without operation after stopping playback from a USB device or CD, or if the unit remains on for 8 hours or more without any operation.
General| Type | Home audio mini system |
|---|---|
| Cassette deck | No |
| Product color | White |
| Disc loading type | Front |
| Optical disc player | Yes |
| Number of optical discs | 1 discs |
| Impedance | 6 Ω |
| Bass reflex | - |
| Speaker type | 1-way |
| RMS rated power | 30 W |
| Number of speakers | 2 |
| Total Harmonic Distortion (THD) | 10 % |
| Supported radio bands | AM, FM |
| Preset stations quantity | 30 |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Display type | LCD |
| Bluetooth profiles | A2DP |
| Audio formats supported | AAC, MP3, WMA |
| Bluetooth version | 2.1+EDR |
| Power source | AC |
Weight and Dimensions| Depth | 234 mm |
|---|---|
| Width | 370 mm |
| Height | 110 mm |
| Weight | 3900 g |
Warning against removing the unit cover to avoid electric shock.
Guidance on unit installation, handling, and maintenance for safety and proper operation.
Instructions for powering the unit on/off and understanding standby modes.
Step-by-step guide to setting the unit's clock and date.
Steps to pair and play music wirelessly from a Bluetooth-enabled device.
Overview of alarm types, playback methods, and supported audio sources.
Steps to configure alarm time, type, source, and volume.
Solutions for common problems like no sound, unexpected shutdowns, and display issues.
Solutions for problems inserting or playing CDs.
Solutions for problems with USB device recognition and playback.
Troubleshooting steps for pairing and connection issues.
Warnings about potential interference with TVs and medical devices.
To Next Page
