SAFETY
TNV IDI Service Manual
3-3
Safety Statements
SAFETY STATEMENTS
Yanmar is concerned for your safety and your
machine’s condition. Safety statements are one of
the primary ways to call your attention to the
potential hazards associated with Yanmar TNV
engine operation. Follow the precautions listed
throughout the manual before operation, during
operation and during periodic maintenance
procedures for your safety, the safety of others and
to protect the performance of your engine. Keep the
labels from becoming dirty or torn and replace
them if they are lost or damaged. Also, if you need
to replace a part that has a label attached to it,
make sure you order the new part and label at the
same time.
Danger (the word “DANGER” is in white letters
with a red rectangle behind it) - indicates an
imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Danger is limited to the most extreme
situations.
Warning (the word “WARNING” is in black
letters with an orange rectangle behind it) –
indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Caution (the word “CAUTION” is in black letters
with a yellow rectangle behind it) – indicates a
potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Caution without the safety alert symbol indicates a
potentially hazardous situation that can cause
damage to the machine, personal property and / or
the environment or cause the machine to operate
improperly.
A
This safety alert symbol appears
with most safety statements. It
means attention, become alert, your
safety is involved! Please read and
abide by the message that follows
the safety alert symbol.
TNV_IDI_ServiceManual_A4.book 3 ページ ２０１２年２月２４日 金曜日 午前１０時２４分
To Next Page
