EasyManua.ls Logo

Yardistry YM12842 - Step 18: Apply Sealant

Yardistry YM12842
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68 support@yardistrystructures.com
DARKENED LINE SHOWS CAULKING
BOUNDARIES
Use caulking
to seal the PLYCARB panels
NOTE; Use caulking for the
inner roof POLYCARB PANELS
as well..
Components
Sealant
Tube
Sealant
See page 6 for Warning and
First Aid Information.
A: On both the inside and outside of the assembly apply silicone sealant on three sides of each Roof Panel
and Small Roof Panel as shown in F18.3. Sealant should be applied in small beads and smoothed out. (F18.1,
F18.2 and F18.3)
Sealant
F18.2
F18.1
F18.3
Small Roof
Panel
Roof
Panel
Roof
Panel
Roof
Panel
Step 18: Apply Sealant
Part 1
Note: All surfaces to be clean, dry, dust
and grease free before application with
temperatures above 5
°
C (41
°
F), no warmer
than 35
°
C (95
°
F).
󰀨
then put in caulking gun. See page 6.
Apply sealant in small beads and smooth
as required.
Clean excess with a cloth or paper towel
before it skins over.
Always wear safety glasses and rubber
gloves when using product.
Top View
Inside View
Small Roof
Panel
Small Roof
Panel
Roof
Panel
Roof
Panel
Sealant
Roof
Panel
Roof
Panel