YASKAWA iQpump Series

36 YASKAWA TM.iQp.02 iQpump Drive Programming Manual
◆ d1 Setpoint and Jog References
■ Setpoint References
Setting Range: 0 to P1-03 Value
Factory Default: 0
Figure 1. 28
Figure 28 Setpoint and Jog Reference Timing Diagram
* Available only with an LCD operator (JVOP-160).
Parameter No. Parameter Name
d1-01 Setpoint Reference 1
d1-02 Setpoint Reference 2
d1-03 Setpoint Reference 3
d1-04 Setpoint Reference 4
RUN
Multi-step
Reference 1 Input
Multi-step
Reference 2 Input
Closed
Open
Closed
Open
Closed
Open
Closed
Open
Jog Input
Output
Speed
t
d1-01
d1-02
d1-03
d1-04
d1-17
Preset
References
Multi-step
SP 1 Input
Multi-step
SP 2 Input
*