9 Web Interface
52 YASKAWA ELECTRIC SIEP C730600 70B V1000 Option SI-EP3/V Technical Manual
Parameter Access Tab
The Parameter Access tab allows the user to read and write parameters from the drive. Write access is restricted until a
valid password is entered.
Figure 40
Figure 41 Parameter Access Tab View
The MEMOBUS/Modbus address for the drive parameter being accessed must be entered in hexadecimal. The number
must begin with “0x” to signify hexadecimal.
Clicking “Read” will load and display the current value of the given MEMOBUS/Modbus Address. Clicking “Set” will
save the given value to the given MEMOBUS/Modbus address.
After a “Read” or “Set” command is given, Status will display “Waiting” while the action is being carried out, then
“Complete” is displayed when finished.
Configuration Tab
The Configuration tab sets web page behavior parameters. Access is restricted unless a valid password is entered.
Figure 41
Figure 42 Configuration Tab View
PROFINET_E_conditional.fm 52 ページ ２０１６年６月２０日 月曜日 午後８時２分
To Next Page
Loading...
